помагите советом кто с этим сталкивался.
Started By маляр, дек 01 2010 20:32
11 ответов в этой теме
#1
Отправлено 01 декабря 2010 - 20:32
у меня принтер "Canon MP140 " катридж заправляю сам, комьютер правда показывает что чернил там нету , но принтер печатает . кончаются снова чернила , и компьютер пишет несовместимость катриджей и он совсем перестает печать.вставляешь новые катриджи и вся история снова повторяется . что заправлять можно только один раз ? или можно как-то взломать эту систему? Заранее спасибо.
Ищу работу, мои работы тут:
#3
Отправлено 03 декабря 2010 - 01:20
# Connected Printer to a Power source, Turn off the printer if printer on
# With the Printer power off, press the Power button while press and hold Stop/Reset button.
# When the Power led is light, press Stop/Reset button two times while pressing and holding the Power button.
# When releasing the Power button and the Stop/Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
# When the on/off lights in green, press the Stop/Reset button four times to reset wase ink counter. For other specified number pressed function listed in the table below. (Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange).
# Unplug cable power from a power source.
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
# With the Printer power off, press the Power button while press and hold Stop/Reset button.
# When the Power led is light, press Stop/Reset button two times while pressing and holding the Power button.
# When releasing the Power button and the Stop/Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
# When the on/off lights in green, press the Stop/Reset button four times to reset wase ink counter. For other specified number pressed function listed in the table below. (Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange).
# Unplug cable power from a power source.
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
Любовь пьянит.....но водка дешевле!
#6
Отправлено 04 декабря 2010 - 16:16
маляр,
для кэнона не знаю... Для эпсона брал тут
http://new.rdm.ee/
можно у них спросить, когда-то кто-то из них тут сидел на форуме даже скидки давал )
Вроде и для кэнона что-то было
но есть и другие конторы
http://www.google.ee...l=&oq=&gs_rfai=
а вообще надо искать по тэгам "снчп / перезаправляемые картриджи"
для кэнона не знаю... Для эпсона брал тут
http://new.rdm.ee/
можно у них спросить, когда-то кто-то из них тут сидел на форуме даже скидки давал )
Вроде и для кэнона что-то было
но есть и другие конторы
http://www.google.ee...l=&oq=&gs_rfai=
а вообще надо искать по тэгам "снчп / перезаправляемые картриджи"
I'm POPEYE The Sailor man
#8
Отправлено 07 декабря 2010 - 12:18
Долго сношался со своим Кэноном MP160.
У меня проблема решается обнулением чипа через MPTool.
У меня проблема решается обнулением чипа через MPTool.
MPTool.
Программа предназначена для сервисных работ с принтерами Canon MP-серии в Factory режиме
на самом деле, идиотов гораздо меньше, чем нормальных людей. Просто расставлены они настолько грамотно, что встречаются на каждом шагу. ;)
#9
Отправлено 14 декабря 2010 - 19:02
У меня такая же проблема с принтером mp160. Обнулял чип через MPTool
Сообщение изменено: JАX (14 декабря 2010 - 19:03 )
Работаю в Jarve ITBuss / Digicell OÜ juhatuse liige
Опытный шаман вылечит вашего электронного друга: танцы с бубном, снятие порчи и сглаза, заговор микросхем.
58182065 Всеволод